| 品牌 | 其他品牌 | 結構形式 | 活塞式 |
|---|
本產品主要用于蒸汽管路，起減壓穩壓作用。
內螺紋蒸汽減壓閥Y13H適用范圍
當前減壓閥系列產品適用于城建、化工、冶金、石油、制藥、食品、飲料、環保等行業。
主要技術參數和性能指標
| 公稱壓力(Mpa) | 1.6 | 2.5 |
|---|---|---|
| 殼體試驗壓力(Mpa)* | 2.4 | 3.75 |
| 密封試驗壓力(Mpa) | 1.6 | 2.5 |
| 進口壓力(Mpa) | 1.6 | 2.5 |
| 出口壓力范圍(Mpa) | 0.1-1.0 | 0.1-1.6 |
| 壓力特性偏差(Mpa)△P2P | GB12246-1989 | |
| 流量特性偏差(Mpa)△P2G | GB12246-1989 | |
| 小壓差 | 0.15 | 0.15 |
| 滲漏量 | GB12245-1989 | |
*.殼體試驗不包括膜片、頂蓋。
主要零件材料
| 零件名稱 | 零件材料 | #FormatImgID_0# |
|---|---|---|
| 閥體 閥蓋 底蓋 | WCB | |
| 閥座 閥盤 | 2Cr13 | |
| 缸套 | 2Cr13/25(鍍硬鉻) | |
| 活塞 | 2Cr13/銅合金 | |
| 活塞環 | 合金鑄鐵 | |
| 導閥座 導閥桿 | 2Cr13 | |
| 膜片 | 1Cr18Ni9Ti | |
| 主閥彈簧 | 50CrVA | |
| 導閥主彈簧 | 50CrVA | |
| 調節彈簧 | 60Si2Mn |
流量系數(Cv)
| DN | 15 | 20 | 25 | 32 | 40 | 50 |
|---|---|---|---|---|---|---|
| Cv | 1 | 2.5 | 4 | 6.5 | 9 | 16 |
連接尺寸
| 公稱通徑DN | G | L | H | Hl |
|---|---|---|---|---|
| 15 | 1/2" | 140 | 295 | 90 |
| 20 | 3-4" | 140 | 330 | 98 |
| 25 | 1" | 160 | 330 | 110 |
| 32 | 1-1/4" | 180 | 330 | 110 |
| 40 | 1-1/4" | 200 | 345 | 125 |
| 50 | 2" | 230 | 345 | 125 |
先導式減壓閥的結構圖,與直動式減壓閥相比，該閥增加了由噴嘴4、擋板3、固定節流孔9及氣室B所組成的噴嘴擋板放大環節。當噴嘴與擋板之間的距離發生微小變化時，就會使B室中的壓力發生根明顯的變化，從而引起膜片10有較大的位移，去控制閥芯6的上下移動，使進氣閥口8開大或關小、提高了對閥芯控制的靈敏度，即提高了穩壓精度。
蒸汽、水用減壓閥當減壓閥的輸出壓力較高或通徑較大時，用調壓彈簧直接調壓，則彈簧剛度必然過大，流量變化時，輸出壓力波動較大，閥的結構尺寸也將增大。蒸汽、水用減壓閥為了克服這些缺點，上海祝茂閥門生產減壓閥可采用先導式減壓閥。先導式減壓閥的工作原理與直動式的基本相同。先導式減壓閥所用的調壓氣體，是由小型的直動式減壓閥供給的。若把小型直動式減壓閥裝在閥體內部，則稱為內部先導式減壓閥;若將小型直動式減壓閥裝在主閥體外部，則稱為外部先導式減壓閥。
上一篇 : 先導活塞式蒸汽減壓閥Y43H/Y
下一篇 : 高靈敏度大流量蒸汽減壓閥YGa43H
咨詢電話